400mm elektrische power ABC kabel voor verkoop

      

 Application and Constructure:

    400mm electrical power ABC cable is applied to overhead power line with rated voltage 0.6/1kv and 10KV and is mainly used for electric power tranmission, rebuiding of urban and forest regions. They can improves safety and reliance of electrified wire netting.

    1kv abc cable, 11kv abc cable, 33kv abc cable

 1 .Type:Duplex Service Drop, Triplex Service Drop, Quadruplex Service Drop

     400mm electrical power ABC cable

    a Duplex Service Drop

       Applications:To supply 120 volt aerial service for temporary service at construction sites,outdoor or street   lighting . For service at 600 volts or lower at a conductor temperature of 75  maximum.

    b Triplex Service Drop

      Applications: To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for PE insulation or 90maximum for XLPE insulation .

    c Quadruplex Service Drop

       Applications: Used to supply 3 phase power , usually from a pole-mounted transformer to the use`s service  head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed75 for PE insulated conductors or 90 for XLPE insulated  conductors.

 2 . Construction

         400mm electrical power ABC cable
    a Phase Conductor construction:

       The phase conductor is aluminum alloy 1350-H19 hard-drawn, compressed concentric-lay-stranded.

     b  Neutral Conductor Construction
       Cable assemblies are available with the following neutral conductors:

       Aluminum conductors, coated-steel reinforced (ACSR), concentric-lay-stranded

       Aluminum alloy 1350-H19 hard-drawn, concentric-lay-stranded

       Aluminum alloy 6201-T81, concentric-lay-stranded

    c Insulation Material
       The standard insulation on the phase conductor is black low-density crosslinked polyethylene (XLPE)

       Alternatively, black linear low-density polyethylene (LLDPE) insulation with a 75°C temperature rating is

         available upon request. 

3. Specification

      400mm electrical power ABC cable

    Other sizes can also be produced as you required.

4. Standards

       400mm electrical power ABC cable   
1. B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
2. B-231 Aluminum Conductors, Concentric-Lay-Stranded.
3. B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).
4. B-399 Concentric-Lay_Stranded 6201-T81 Aluminum Alloy Conductors.
5. B498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR).
6. Duplex Service Drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474

 

The company and part of our certification

 

 

 

 

 The factory and equipment

 

 

 

The shipping

 

LOOKING FORWARD TO COOPERATING WITH YOU !